Bumper- Rear

• Smitty Bilt Apollo JL/JT Rear Bumper

See All

• 10-Stage Variable Valving
• High Pressure Nitrogen Charged
• Protects Vehicle From On And Off-Road Debris
• D-rings Included - 4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Black Finish

See All

• 100 Percent Made In Texas USA
• Standard Premium 5-Stage Satin Black Powder-Coat Finish
• Has Recessed Light Pods For 2X Rigid SRM Backup Lights
• Has Recessed Light Pods For QuakeLED QQU451
• Special Order Options Include Tire Carrier /Corner Guard Upgrades

See All

• Mount Kit Sold Separately
• Popular Diamond Tread Design
• Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
• Downsize and Compact Are 350/3500 lb. Weights
• V5 Tested Certified To SAE J684

See All

• Rear Bumper

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HS Shackle Mounts
• Two Flush Mount Led Lights Included
• License Plate Illumination Lights Included
• Laser-Cut HDX Logo On Ends
• Application Specific Designs
• Mounting Brackets Included
• Available With Or Without Provision For Back-Up Sensors
• Available In Textured Black Finish Or Raw

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [2] Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Incl. Backup Sensor Relocators

See All

• Modular Rear Bumper Specifically Designed
• Heavy-Duty Tire Carrier And Departure Roller Kit
• With Optional Accessories Like End Caps
• Modular Design Lets You Build Up The Rear Bumper As Desired
• High-Access Profile Allows More Clearance Over Rocks
• 3/16 in. Thick Steel To Withstand Tough Off-Road Trails
• Bolt-On Installation To Factory Bumper Mounting Locations
• No Drilling Required
• Incl. Fully-Welded D-Ring Shackle Mounts w/1 in. Inside Diameter
• Tough As Nails - Tested For Durability And Strength
• Accessories Not Included

See All

• 3/16 in. Laser Cut Steel w/E-Coat And Wrinkle Finish Powder-Coat
• Warning Do Not Exceed Towing Capacity
• Includes A Class 2.5 Receiver Hitch
• No-Drill Application
• w/Bolt-On Convenience To Factory Mounting Points
• D-Rings Sold Separately
• D-Ring Mounting Bosses Welded Both Front And Back For Strength
• 2 in. Hitch Mount Accessories
• Approach/Departure Roller Mounts Not Included

See All

• Identity Jeep Rear Bumper

See All

• iDentity Bumper Components

See All

• Truly Modular Design For Customization
• Optional Shackle Or Non-Shackle Mount End Pods Available
• Avail. Mesh And Trim Ring Inserts w/Integrated Parking Sensors
• Integrated 8 in. Accent Led Lighting w/Preparatory Control Module
• Accommodates w/Factory Hitch And Tow Point
• Allows For Multitude Of Rear Facing Light Options
• Constructed From High Quality Steel
• Made In USA

See All

• Identity Rear Bumper Shackle End Pods

See All

• 10-Stage Variable Valving
• Durable Steel Construction
• Includes 2 Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Includes Backup Sensor Relocators

See All

• Provides A Stable Platform While Providing Max Towing Capacity
• Black Powdercoat Finish For Superior Corrosion Resistance
• Options Are Bolt On Receiver And Black Matte Finish
• Proudly Made In The USA

See All

• Direct Fit
• Manufactured From 3/16 and 1/4 Cold Roll Steel
• Solid Mount D-Rings Welded On The Inside And Out
• Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
• Smittybilt Advantage Warranty

See All

• M1A2 Modular Rear Bumper For 14-18 Chevy Silverado

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame
• Optional Class III/IV Hitch Available. Sold Separately
• Retractable License Plate Holder Conceals Receiver Hitch
• Equipped With Mount Points For Optional Auxiliary Lights
• Available For Vehicles With Or Without Backup Sensors
• Bolt-On Installation; No Drilling Required

See All

• Signature Series Step Pad
• Complete Assembly
• Molded Polymer Step Pads
• V5 certified
• Interchangeable Components
• 3 Year Warranty

See All

• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Compatible For Blind Spot Monitors And Parking Sensors
• Accommodate For Oem Hitch And Led Back Up Lights
• Configured To Accept 2 Fm6 Led Flush Mount
• Custom Laser-Cut Westin Logo
• Hardware And Mounting Brackets Included
• Bolt-On Installation - No Drilling Required

See All

• Mounting Brackets Will Vary With Make/Model

See All

• Brushed Aluminum Skid Plate Included- Works with Factory Hitch
• Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
• Pre-Runner Style
• 5 year Finish Warranty- Lifetime Workmanship Warranty

See All

• Rear Bumper

See All

• Direct Fit
• Dual Gloss Black Powdercoat Painted Finish
• Dense Zinc Treated Undercoating
• Expertly Robotically Welded
• Bumper Bolts Directly On To Vehicle
• 2 in. Receiver Hitch
• 5 Year Limited Warranty

See All

• Rear Bumper Kit

See All

• Easy Bolt-on Installation.
• Aggressive Appearance.
• Incl. [2] Rough Country Led Cubes
• Incl. D-rings
• Retains Factory Receiver Hitch

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HD Shackle Mounts
• Two Flush Mount Led Lights Included
• Welded Hitch Receiver
• Laser-Cut Snyper Logo On Ends
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• With Receiver
• No D-Ring Mounts

See All

• Manufactured From Durable 5/32 Steel And 2x.120 Tubing
• Protects Vehicle From On And Off-Road Debris
• Incl. D-Ring Set
• Satin Black Finish
• Installation Hardware Included

See All

• 11-Gauge Main Body
• 7-Gauge Bracketry
• Louvered Recesses For Reduced Drag
• Sensor Compatible
• Direct Bolt On Application
• Block Off Plate w/Stainless Hardware For No Lighting Option
• High Clearance Bumper
• Formed To Fit The Contours Of Vehicle
• CNC Laser Cut
• Made In America

See All

• Spartan Rear Bumper

See All

• Durable Black Powdercoated
• Made From Formed Channel
• Diamond Plated Step Plates And Skirts
• Comes Standard With Backup/Work Lights
• Factory Receiver Must Be Retained
• Black Matte Finish Is An Option
• Proudly Made In The USA

See All

• Raised corners for better entry and exit under the most extreme conditions
• Accommodates 3X3 Cube Led Lights
• Integrated 3/4 in. D-Ring Mounts
• Class Iii Receiver Hitch
• Integrated Jack Points
• Perfect Mid Width Design

See All

• Direct Fit
• E-Coat Undercoated With Dual Stage Textured Black Powder Coat
• Heavy-Duty 1/4 in. Steel Plate Design
• Three Point Mounting System Supports Over-Sized Tires
• Special Lock Design Keeps Tire Carrier Secure While Off-Roading
• 5 Year Limited Warranty

See All

• New solid D-ring and jack point mount - welded on the inside and out!
• Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
• UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
• Aux back up light cut out provided
• 3/16-inch cold rolled steel with two-stage textured matte black finish
• Powder coat finish 5 year limited warranty
• Smittybilt limited lifetime warranty
• Modular design; tire carrier can be added in the future.
• Class III hitch for true towing with towable d-ring

See All

• Direct Fit
• Black Powder Coat
• Dense Zinc Treated Undercoating
• Two Stage Textured Black Powder Coat Finish
• Expertly Robotically Welded
• Bumpers Bolt Directly To Your Vehicle
• Bumper Is 2 in.X.120 in. Wall
• 2 in. Receiver Rated Class III 9;000 LBS.

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In Texas USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Made In American And Texas Strong USA
• 3/16 in. Heavy Duty Steel Construction
• 1/4 in. Gusseting And Internal Bracketry
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Superior Foot Forward Winch Mount Fits WARN M8000 Or 9.5XP
• Includes License Plate Lights
• Light Ports For Led Backup Lights
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• Not Vehicle Specific
• 3mm Deep Drawn Formed Steel
• Winch Compatible Up To 12K
• Includes Modular Wings With Light Provisions
• Integrated D-Ring and Lift Points
• Oe Fog Light Provision
• Integrated Overrider With 13 in. Lightbar Provision

See All

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

See All

• Safely Holds Up To 37 In. Tires
• Innovative Swing-Out System
• Includes 3rd Brake Light Relocation Bracket
• Includes License Plate Relocation Bracket
• Durable Steel Construction

See All

• Functional Design
• Works With 2 in. Receiver Tow Hitch
• Contoured Corners
• Allows Clearance For Spare Tire
• Black Powdercoat Finish
• 3 Year Warranty

See All

• Made In American And Texas Strong USA
• Schedule 40 Pipe For Center Structure
• 11 Gauge Shell w/1/4 in. Heavy Duty Mounting System
• CNC Laser Cut
• Precision Brake Formed
• Welded By Craftsmen Inside And Out
• Direct Bolt On Design
• Recessed Light Ports For Flush Or Surface Mount Led Cubes
• Mounting Holes For License Plate
• Standard Premium 5-Stage Satin Black Powder-Coat Finish

See All

• RotoPax Mount

See All

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All

• Fits up to 37 in. tires
• Class III tow rated
• New cam-style pin adjustment
• Easy 2 finger opening latch
• Double catch latch eliminates accidental opening
• MOLLE Pals compatible to allow multiple pouch mounting configurations
• Stainless steel pivot washer for longer wear life
• 3rd brake light bracket included
• integrated gas can and jack mounts

See All

• Bolt-on design for XRC GEN2 bumpers
• Frame pivot point for added strength
• Tuned one-handed opening operation; tuned to factory tailgate
• CB and jack mounts and Roto Pax® gas can holder
• Manufactured from 3/16 in. cold rolled steel
• Two-stage textured matte black finish

See All

• Direct Fit
• 2 And 4-Door Models
• Two Stage Matte Black Textured Powder Coat Finish

See All